Danfoss Micro Drive FC51

Danfoss Micro Drive FC51

Danfoss FC51 Micro Drive is a perfect solution for Industrial, HVAC and OEM applications. This drive comes with coated circuit boards as standard together with a high reliability factor.

Perfect for panel installation, offering the following benefits:




  • IP20 IP Rating.
  • 5 Programmable digital inputs.
  • Detachable keypad with a choice of potentiometer or not.
  • Single or Three Phase options.
  • Single phase – up to 2.2Kw.
  • Three Phase – up to 22Kw.
  • Output Frequency – up to 400Hz (U/F Mode).
  • Analog Inputs – 2
  • Pulse Inputs – 1
  • Programmable Outputs – 1
  • Relay Outputs – 1
  • Common Programming throughout the Danfoss FC range.
  • Input Switching – 1 or 2 times/ per minute.
  • 24V DC Control Voltage.
  • Remote mounting kit + 3m Cable
  • Blank plate instead of Keypad
  • Din rail Mounting Kit
  • IP21 Conversion Kit (NEMA)
  • De coupling Plate


Danfoss FC51 In Stock

We hold large stocks of FC51 drives including 0.37Kw up to 2.2Kw Single Phase options. These drives are suitable for a Single Phase supply input, controlling a motor with 230/400v Three Phase winding.

The Danfoss FC51 Single Phase version is commonly used for Phase conversion for three Phase Lathes, Pillar drills, Car ramps. Together with Three Phase milk pumps. We can install into a plastic enclosures with a option of start/ stop/ reverse and potentiometer controls too.

The Danfoss FC51 Three Phase version is used throughout industry as a machinery drive. Which means they are cost effective but feature rich. Commonly used to receive a 0-10v reference or a 4-20mA signal for speed control. Also used for simple PID control too.

All Danfoss Micro Drives have a numerical Keypad which can be used to program. But the MCT10 Danfoss Software is available free to download. Moreover this makes it easier to commission especially if on site.

Danfoss Support.

E.Bennett (Electrical) offer full support for these drives, either on the telephone or email. Links below lead you to the relevant guides – Design guide, Quick Setup guide and Programming guide. Also visit our get in touch page for full contact details.



See our products page.



I agree to receiving news about E Bennet Electrical LTD.